
F-Soda is designed to carbonate water and can be easily integrated into small vending machines and water dispensers that were not built for this purpose. The unit has the advantage of working at low pressures, thanks to its special design, and so can offer higher levels of safety and reliability than similar products using existing technology. F-Soda is simple to use and delivers high levels of effervescence, which can be adjusted with the control pressure on the CO2. F-Soda is equipped with an integrated circuit board to control different functions.
The "Fat Boy" is a 12VDC, 5 chamber, positive displacement diaphragm pump, and like all our diaphragm pumps is self priming and capable of being run dry for short periods without damage. Delivering a massive 26 litres per minute open flow, this pump brings a new dimension to battery-powered pump performance.
The Fluid-o-Tech MGFR series combines a 24V brushless DC drive motor in a rotor-less configuration with a high precision magnetically coupled external gear pump to deliver a high-end system capable of handling fluids in the most demanding applications.
Because there are so few moving parts in the unit, the service life is greatly extended compared to traditional pump-motor units.
The integration of the pump, motor and variable speed controller provides an electromagnetically coupled, leak free system with a high degree of versatility. The extreme accuracy of the design and of the finishing allows the unit to deliver a smooth and pulsation free flow in all conditions.
There are applications where the liquids involved are very difficult to handle and working solutions are hard to find and require significant investment. The PG300 series gear pump is Fluid-o-Tech's answer to this challenge.
Designed to deliver the same high performance as the MG300 series, the PG300 series pumps are built in a special grade of PPS to offer the greatest chemical compatibility while allowing for exceptional mechanical characteristics.
Gears are available in Peek and PTFE, and the comprehensive range of elastomers is available. Coupling magnets can be ferrite or rare earth, depending on the requirements of the application.
Combining Aquatec pump heads with 230v AC induction motors, we are now able to offer a new dimension of high performance diaphragm pumps that just run and run and run...
With a choice of two motor speeds, 3 or 5 chamber pump heads, several different flow rates for each head, bypass or pressure switch controls and Viton or EPDM valve sets, the range offers over 60 different combinations!
David Simms joins Becktech as Sales Executive responsible for vending operators.
David worked as Field Sales Manager and Franchise Co-ordinator with Snack-In-The-Box for 15 years and is a welcome addition to the Becktech team.
Becktech appoints Johs Thornam A/S as distributor of Aquatec pumps in Denmark. Based in Farum, just outside Copenhagen, Johs Thornam was founded in 1887 and has developed an impressive reputation as an engineering sales and service company.
Johs Thornam is active in both the marine and industrial sectors and will be able to supply the full range of Aquatec pumps in Denmark, providing excellent local back-up services to Danish customers.
Account customers can now place orders online across our whole range of products, making it even easier to take full advantage of the comprehensive range, from Brita professional water filters to machine spares and pumps.
Becktech launches CleanVend - a range of cleaning chemicals ideally formulated for use in vending and espresso coffee machines. Includes ready to use and concentrated sanitizers, a destainer and a descaler.
See the CleanVend range by clicking here.
Becktech launches FilterMinder - an online database to enable operators to get the maximum return on their investment in BRITA® filter technology.
FilterMinder is a database driven solution that tracks individual filter exchange dates based on estimated water usage and the actual local water hardness conditions.
The system generates timely reminders of units coming up for exchange allowing operators to place orders and schedule work when it's most convenient.
Read more about FilterMinder by clicking here.
Aquatec Water Systems Inc, the US based manufacturer of diaphragm pumps, appoints Becktech as its Master Distributor for the UK, Benelux and Scandinavia, following over 4 years of successful partnership in the UK.
Bryan Hausner, President of Aquatec said, "Demand for our pumps in the UK and Europe has grown significantly over recent years, and we recognised the need to offer customers a more responsive distribution and backup service. We see Becktech as the ideal partner to build our business in northern Europe."
From Becktech’s point of view, the huge versatility and strong reputation for quality of the Aquatec pump range means that they practically sell themselves. Whether it’s in soft drinks, Pure Water, solar energy or light industrial equipment, Aquatec pumps perform impressively. We are delighted to be representing Aquatec.
BRITA® Water Filter Systems appoints Becktech as its authorised distributor to the coffee sector, building on a successful relationship between the two which began in vending more than 7 years ago.
Anthony Spruce, Sales Director at BRITA® Professional commented: "We are committed to improving the accessibility of BRITA® water filter products in the coffee sector, and believe that Becktech is an ideal partner to do this for us."
Rob Webb, Managing Director of Becktech added: "We’re convinced of the benefits to both operators and consumers of putting BRITA-filtered water at the heart of a hot drink. Properly applied in the vending market, we’ve seen the BRITA® effect increase operator revenues while decreasing costs - we think everyone should have the opportunity to reap these rewards. We’re delighted to be taking our relationship with BRITA® into the coffee market."
To underline the Becktech committment to BRITA® we have developed a unique online filter exchange calculator to enable coffee and vending operators to calculate the optimum exchange interval for their filters based on local water hardness and water usage.
Becktech has teamed up with Aquatec to offer a range of replacement pumps for water fed pole reach window cleaning systems. The service is designed to suit busy operators, with over the phone ordering and payment facility. The range includes on-demand pumps for single or multi-pole use, transfer pumps for filling mobile tanks and booster pumps to feed reverse osmosis systems. See our web page for more details, or ring us for current prices.
Componenti launches an adjustable cup ring, capable of dispensing 80mm to 100mm cups. This generated much interest when it debuted in the award winning Gerhardt machine at Eu’Vend in 2007 because for the first time it offers vending an opportunity to deliver 12oz drink, competing directly with the retail coffee outlets.
Componenti are following this up with a fixed 80mm cup ring which will soon be integrated with the 4-peeler 672 range cup mech. A number of other developments are underway which Becktech hope to present in the spring, including a new espresso brewer and a quick-change peristaltic pump.
New website launches, with more products than ever before and a comprehensive site search facility on the site. Additional technical information on products will soon be available through fully integrated data sheets. Website design by Marina Rose - www.marinarose.co.uk.
Becktech offers Zuma brewer refurbishment service, in addition to the King and deJong refurbishments that we have been doing for years.
Becktech Limited appoints Robert Webb to its board of directors. Rob‘s challenge is to lead the company through its next stage of evolution, building on Becktech‘s 25 year track record. Rob will be looking to develop the mix of products and services provided and has set some ambitious growth targets.
The Fluid-o-Tech production facility moves to its new home – a purpose built factory just outside Milan.
The joint venture set up between Becktech Limited and AK Müller GmbH – AK Muller (UK) Limited – runs its course as AK Muller (UK) becomes independent of Becktech.
Becktech and Brita celebrate the first 5 years of their successful partnership with demand for Brita professional water filters stronger than ever.
Becktech celebrates its 25th birthday with a party at the Chichester Real Ale and Jazz Festival.
Componenti launch two new products. The first is a range of peristaltic pumps designed to deliver accurate and constant volumes of a vast range of liquids. They are compact, modular and have the fundamental characteristic of separating pumped liquids from all mechanical elements of the pump. The second is a range of coffee grinders designed to meet the demanding requirements of bean-to-cup coffee drinks in fully automated vending machines.
Becktech updates its quality system from the ISO 9002:1994 standard, first awarded to Becktech in 1994, to ISO 9001:2000. Our current certificate is available to view online.
Fluid-o-Tech launches the completely innovative TMFR series of pump – an integrated unit where the motor has no moving parts. The combination of compact size, superior performance and low energy consumption provide great versatility in a refined, high-tech design, ideal where space and reliability are at a premium.
Componenti buys Plastimat, a specialist injection moulding company formed in 1969. This formalises a strong and lasting interdependence between the two companies and will mean increased flexibility and responsiveness in the market. New tooling is now available from Plastimat and its partner in China at very competitive rates.
Becktech moves to new purpose built premises in Terminus Road, Chichester, West Sussex giving us 16,000 square feet of office and storage space.
Click to expand / hide the year below