For friendly and helpful advice call now
01243 523130

Home / Fluid-o-Tech TM series rotary vane pumps

Fluid-o-Tech TM series rotary vane pumps

Download PDFFluid-o-Tech TM series rotary vane pumps

 

Fluid-o-Tech, fluid o tech, fluidotech, TM series mag drive rotary vane, volumetirc positive displacement pump. The Fluid-o-Tech magnetic drive rotary vane pumps combine the established range of pumps with the added advantage of an indirect magnetic coupling.

The principle of the magnetic drive comprises an inner magnet embodied in the pump and connected to the rotor, and an outer magnet connected to the motor shaft. The pole-to-pole alignment of the two magnets provides the driving motion to the pump. Decoupling occurs when the pump load exceeds the coupling torque between the magnets. The introduction of a new driving magnet with improved torque (available upon request) brings the maximum operating pressure to the same values of the PO series with direct coupling.

The Rotoflow TM Series magnetic drive rotary vane pumps are housed in stainless steel AISI 303 or brass housing, with carbon graphite internal components.

Max system pressure: 18 Bar (260 psi). Max temperature: 70°C (158°F)

Benefits of magnetic drive:

  • longer service life
  • no mechanical seals
  • totally sealed body
  • low maintenance
  • less power consumption
  • smooth transmission

 

Available on request:

  • 3/8" GAS or NPT threaded ports
  • standard or balanced relief valve
  • NBR, EPDM or Viton seals
  • NSF listed pumps for potable water (TM...A series)

Technical Specification:

Pump with balanced by-pass valve:

 

Pump with standard by-pass valve:

Performance Data:

 

Model series:

03x

05x

07x

10x

15x

20x

Figure

A-A

B-B

C-C

D-D

E-E

F-F

The x in the model series number designates the bypass option.

 

Perfomance chart at 60Hz, 1450 RPM.

 

Performance chart at 60Hz 2900 RPM.

 

The solid line indicates curves with driving magnets TMAF09S, TMAF11S, TMAF5BS.

The dotted line indicates curves with driving magnets TMAS09C, TMAS11C, TMAS5BC.

Note: characteristics with water at 20°C and without by-pass. Use filter before pump inlet not larger than 10 microns. Pump weight: 1.1kg.

For applications involving other fluids, high temperatures, unusual processing conditions or speed higher than 2500 rpm please contact us.

Products