For friendly and helpful advice call now
01243 523130

Home / Aquatec 5800/7800

Aquatec 5800/7800 Series pumps

Download PDFAquatec 5800/7800 Series pumps

These pumps are designed for intermittent duty, although most models can run continuously for hours at a time. They are typically used to either pressurize water drawn from an atmospheric tank, deliver purified water to a specific point of use, or merely to increase pressure when required. These pumps can either be controlled by pressure switch ("demand" mode) or an external power control device ("delivery" mode). When necessary, they can incorporate an integrated bypass to help limit pressure.

These pumps are typically used either to pressurize water drawn from an atmospheric tank, deliver purified water to a specific point of use, or merely to increase pressure when required. They can be controlled by pressure switch ("demand" mode) or by an external power control device ("delivery" mode).Click to enlarge this drawing.

Typical Applications:

  • Water Treatment/RO
  • Beverage/Foodservice
  • Distillation Equipment
  • Water fed pole delivery pump

 

  • Agricultural Spraying
  • General Industrial
  • Automotive

 

Technical Specifications:

Motor: Available motors from 12v DC to 230v AC, energy requirements between 25W-100W (depending on flow, pressure). Can be used with compatible transformers and/or DC power supplies. Standard terminations are 12", stripped end AWG leadwires, with connectors and power cords also available.

Envelope Dimensions: Approximately 75mm x 100mm x 175mm, weighing 2.7 Kg.

Mounting: Standard offering is a steel mounting base with four hollow rubber grommets. These pumps may be mounted in any position.

Control Options: Internal bypass (20-200 PSI), pressure switch (40-100 PSI).

Fittings: 5800 Series options include built-in 3/8", 1/4", or 5/16" John Guest half cartridges.

 

7800 Series options include 3/8" or 1/2" hose barb, quick connect fittings.

Pump design: 3 chamber diaphragm pump, self priming, capable of being run dry.

Materials:

Housings:

Polypropylene

Valves:

EPDM

Diaphragm:

Santoprene

Fasteners:

Stainless steel

Liquid temperature: 140°F (60°C) max.

Pump certifications: NSF Standard 58.

Priming capabilities:

Model 58X0:

5 feet

Model 58X1:

5.5 feet

Model 58X2:

6 feet

Model 58X3:

9 feet

Model 58X4

9.5 feet

Performance Data:

 

Discharge pressure

Pumphead model

58X0

58X1

58X2

58X3

58X4

(PSI)

Flow (GPM)

Current (Amps)

Flow (GPM)

Current (Amps)

Flow (GPM)

Current (Amps)

Flow (GPM)

Current (Amps)

Flow (GPM)

Current (Amps)

70

0.66

0.23

0.82

0.27

1.00

0.35

1.15

0.39

1.25

0.44

60

0.72

0.22

0.90

0.25

1.05

0.32

1.20

0.36

1.34

0.40

50

0.78

0.21

0.92

0.23

1.16

0.29

1.25

0.33

1.38

0.37

40

0.85

0.19

0.95

0.21

1.18

0.27

1.30

0.30

1.42

0.33

30

0.88

0.17

0.98

0.19

1.25

0.24

1.40

0.27

1.50

0.29

20

0.95

0.15

1.00

0.17

1.30

0.21

1.45

0.24

1.55

0.26

10

0.98

0.13

1.10

0.15

1.36

0.19

1.50

0.23

1.65

0.25

Open

1.00

0.12

1.15

0.14

1.40

0.18

1.55

0.22

1.70

0.24

 

Performance measured with flooded inlet (0 PSI), 70° (21°C) ambient water temperature and voltage controlled at 230v AC, 60 Hz. Positive inlet pressure will increase the discharge pressure by a similar amount for a given flow.

Products